ARCHIVES


Utilitaires PC
Ncubate v032b
Taille du fichier : 145.028 Ko
Nombre de téléchargements : 2412
Nombre de vues : 26885
Description rapide : Ncubate est un dérivé d'nspire_emu (fork)
Auteur de l'archive : ExtendeD
Calculatrices concernées : TI-Nspire TI-NspireCAS
Hardware concernés : Indifférent
ROMs (AMS) supportés : Tous (ou non renseigné)
Langage de programmation utilisé : C
Description Complète : ===============
= Ncubate Emu =
===============

What is it?
===========

Ncubate Emu is an enhanced version of the TI-Nspire emulator nspire_emu.

Features
========

Ncubate adds the following features to nspire_emu v032:

GUI:
- NEW: 'File -> Save State' let you save the whole emulator state to a file
named <flash_image>.sav. The file is loaded on startup if it exists. You can
request a state reload with 'File -> Reload State'
Caution, newer versions of Ncubate may fail to read .sav files produced by
previous versions. Delete these files when upgrading.
- NEW: 'File -> Save Flash As...' suggests the current flash image name
- NEW: several keyboard shortcuts added

Debugger:
- NEW: Supports the GNU Debugger GDB. You can debug at source-level programs
built with Ndless. More information available at http://hackspire.unsads.com
- NEW: The register PC can be changed with the command 'rs
- NEW: Command 'j' to jump to the next instruction. This is useful for example
to jump over an halt() call in an Ndless program.
- NEW: Command 'ww' to write a word to an address
- NEW: Command 'ss' to search a string in memory
- NEW: "+x" is the default flag for the breakpoint command 'k'
- NEW: Command 'wf' to load a file to memory
- NEW: Command-line option /R=cmdfile can be used to automatically run debugger
commands on startup. Use a single line for each command. At the end of the file,
the debugger switches to the standard input. You can use 'c' as the last
command to continue the emulation.
- CHG: The breakpoint command 'k' takes as parameter a virtual address instead
of a physical address
- CHG: Debugger command 'w' renamed to 'wm'
- CHG: The command 'wm' takes as parameter a virtual address instead of a
physical address
- CHG: Read/write breakpoint logs display a virtual address instead of a
physical address
- FIX: Command 'd' doesn't crash if the parameter is missing
- FIX: Broken 'w' command

CPU/Ports:
- ADD: (internal) ARM loader for arbitrary ARM snippet execution by the emulator
- FIX: no more 'bad read word' on auto power down, but still hangs

Flash:
- FIX: Flash image closed when synced to disk, for external edition

Build:
- NEW: Makefile.config for custom compilation flags
- NEW: make clean
- FIX: compilation warnings

What may be incubated later
===========================

- Faster save/reload state

Development team
================

Olivier Armand aka ExtendeD - < olivier dot calc at gmail dot com >
based on nspire_emu by Goplat

Changelog
=========

* v032b - 2010/11/06
- ADD: GDB support
- ADD: Command-line option /R
- CHG: Read/write breakpoint logs display a virtual address instead of a
physical address
- FIX: 'j' (over a non-branch instruction) and 'rs pc' debugger commands
incorrectly skipped the target instruction
- FIX: flash file creation (/N) may sometimes fail
- FIX: no more 'bad read word' on auto power down, but still hangs
- FIX: ineffective command line option /D when saved state was reloaded on startup

* v032a - 2010/09/21
- Migrate to nspire_emu v032
- ADD: Debugger command 'ss'
- ADD: Debugger command 'wf'
- CHG: Debugger command 'w' renamed to 'wm'
- FIX: Debugger command 'j' supports thumb state
- FIX: Broken debugger command 'w' (now 'wm')

* v031a - 2010/08/30
- Migrate to nspire_emu v031
- ADD: State file version tracking
- ADD: Link target folder saved to save files
- ADD: Debugger command 'j'
- ADD: Debugger command 'ww'
- ADD: "+x" is the default flag for command 'k'
- CHG: Command 'k' uses virtual addresses
- CHG: Add shortcut for link connect, change shortcut to send a document
- CHG: Remove log "Wrote to translated code..."
- FIX: Couldn't save flash after sending a document from another directory when
loading a flash image with a relative path.
- FIX: Command 'd' doesn't crash if the parameter is missing
- FIX: "disconnect" not required anymore after a state reload before connecting

* v030a - 2010/08/15
- First public release
Archive mise en ligne par : Vince
Date de mise en ligne : 6/11/2010 à 18:05:09

- Ti FR v3 - Ce site n'est pas le site officiel de texas instruments. En cas de problèmes techniques sur le site veuillez contacter l'administrateur. Merci de vos visites !
page générée en 2024 ms